There are currently no product reviews.
;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
5
6
7
8
7.1.5 DISASSEMBLY
Note: For performing the diagnosis shown below, the following jig cable for service are required: � GGD1335
A
1 Grille Assy and Front Panel
1
Remove the grille assy by removing the four screws. Grille Assy
3 4 5 1
Remove the two screws. Remove the one connector. Removing the hooks of the bottom plate, remove the front panel.
1
1
1
B
RELAY Assy
4
CN3502
� Rear View
C
2
Remove the two screws.
3
3
2
Remove these hooks when removing the front panel.
D
2
Front Panel
5
� Bottom View
E
F
XW-DV515
5 6 7 8
63
|