|
|
|
Who's Online
There currently are 5757 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
;
The manual was exactly what I wanted and I found it nowhere else. Thanks!
Before You Start
1
Don�t...
Putting the batteries in the remote
1 Open the battery compartment cover on the back of the remote control unit.
1
� Use in a place exposed to high temperatures or humidity, including near radiators and other heat-generating appliances. � Place on a window sill or other place where any of the � � � � � components or speakers will be exposed to direct sunlight. Use in an excessively dusty or damp environment. Place directly on top of any appliance which becomes hot in use. Use near a television or monitor as you may experience interference�especially if the television uses an indoor antenna. Use in a kitchen or other room where the unit may be exposed to smoke or steam. Place on an unstable surface, or one that is not large enough to support all four of the unit�s feet, or the whole footprint of each speaker. Block the cooling fan on the rear of the unit. Don�t cover the unit with cloth, or use on thick carpet, etc. Put objects on top of the speakers.
2 Load the two AA/R6P batteries 2 into the battery compartment following the indications (ª, ·) inside the compartment. 3 Close the cover.
Caution!
� Remove the batteries if the remote is 3 not going to be used for a month or more. � Remove dead batteries promptly� they can leak and damage the unit.
� �
Using the remote control
Keep in mind the following when using the remote control unit: � Make sure that there are no obstacles in between the remote and the remote sensor on the unit. � Use within the operating range and angle, as shown in the diagram. (A) � Remote operation may (A) become unreliable if strong sunlight or fluorescent light is shining on the unit�s remote sensor. � Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located nearby this unit. � Replace the batteries when you notice a fall off in the operating range of the remote.
Avoiding condensation problems
Condensation may form inside the unit if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won�t damage the unit, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.
Moving the system unit
If you need to move the system unit, first switch it off and unplug from the wall outlet. Never lift or move the unit during playback�discs rotate at a high speed and may be damaged.
Discs compatible with this system
Any disc that displays one of the following logos should play in this system. Other formats, including DVD, Video CD, CD-R, CDRW, CD-ROM, SACD and Photo CD will not play. 12cm or 8cm discs.
Finding a suitable location
Do...
We want you to enjoy using your new stereo system for years to come, so please bear in mind the following points when choosing a suitable location for the system components and speakers: � Use in a well-ventilated room. � Place on a solid, flat, level surface, such as a table, shelf or stereo rack.
5
En
|
|
|
> |
|
