There are currently no product reviews.
;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Setting the Time
Example: To set the time to 7:15 AM
The time (24-hour format) is indicated on the CD/receiver�s display panel. The first time the power is connected, the display panel flashes to indicate that the time needs to be set. Use the CD/receiver�s buttons to do this as described below.
Display panel: shows the current time
1 Press and hold the TIMER SETTING
button for at least three seconds.
The CD/receiver turns on and the back light of the display panel lights.
Display panel
The �Hour� flashes.
2 Use the + and/or � buttons to set the
hour, then press the ENTER button.
Display panel
,,,,, ,,,,,,, ,,,,,, ,,, ,,, ,,,,, ,,,,,,, ,,,,,, ,,, ,,, ,,,,, ,,,,,,, ,,,,,, ,,, ,,, ,,,,, ,,,,,,, ,,,,,, ,,, ,,,
The �Minute� flashes.
3 Use the + and/or � buttons to set the
minute.
CANCEL button + / � button
ENTER button
One way to ensure an accurate time setting is to temporarily set a time that is slightly faster than the actual time, then use the time announcements on the radio or TV to set the time. After doing this, go on to Step 4 below.
TIMER SETTING button
4 Press the ENTER button.
Display panel
PREPARATIONS
Before setting the time
Turn the system�s power off before making the time settings. If the power is currently on, press the POWER button to switch it off.
The CD/receiver turns off, then the clock starts to run.
How to cancel
Press the CANCEL button while setting the time (before pressing ENTER at Step 4). This resets the time to its status prior to Step 1.
Note on the time display
The time display does not appear when the system�s power is on.
You must reset the time setting in the following situations:
� The power plug has been disconnected from the wall outlet, such as when moving the system. � A power outage has occurred.
17
|