I found my Clarion VRX8370R in the Camper I bought and I wasn't able for month to understand it.
The Owner Manual was perfect and just what I was searching for.
Thank you.
Leonardo
Very good copy of Manual, clear and easy to print off, arrived very promptly and reasonably priced.
Thanks, I will use you again.
Text excerpt from page 65 (click to view)
Adjusting the sound
11
Adjusting the bass and treble
To help you get the sound you want you can increase or reduce the bass and treble. � Default setting: BASS+1 (EV51DVD) BASS+2 (EV21DVD) 1 Press SOUND MODE repeatedly to select BASS or TREBLE. You can also use the / (cursor left/right) buttons on the remote to select a menu item after you�ve pressed SOUND MODE. 2 Use / (remote) or 4/1 and ¡/¢ (front panel) to adjust the sound. The bass and treble can be adjusted from -4 to +4. 3 Press ENTER.
Creating wider stereo sound
EV21DVD model only The Stereo Wide feature makes the stereo spread appear wider than it really is�useful when the speakers are close together. 1 Press SOUND MODE repeatedly to select ST-W ON or ST-W OFF. You can also use the / (cursor left/right) buttons on the remote to select a menu item after you�ve pressed SOUND MODE. 2 Use / (remote) or 4/1 and ¡/¢ (front panel) to select ST-W ON or OFF. 3 Press ENTER.
Adjusting the balance
EV21DVD model only To help you get the sound you want you can change the left/right balance. 1 Press SOUND MODE repeatedly to select CENTER, LEFT or RIGHT. You can also use the / (cursor left/right) buttons on the remote to select CENTER, LEFT or RIGHT after you�ve pressed SOUND MODE. 2 Use / (remote) or 4/1 and ¡/¢ (front panel) to adjust the balance. The balance can be adjusted from Left 10 to Right 10. 3 Press ENTER.
Saving your sound preferences
EV21DVD model only If you have certain preferences for the bass, treble and stereo-wide controls, you can store these as a preset for easy recall. 1 Make sure the stereo-wide and tone controls are the way you want them, then press and hold ENTER for three seconds. USER 1 or USER 2 will blink in the display. 2 Use / (remote) or 4/1 and ¡/¢ (front panel) to select USER 1 or USER 2. 3 Press ENTER.
