|
|
|
Who's Online
There currently are 5893 guests and
2 members online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This Manual (as downloaded) is both informative and comprehensive and has proved to be extremely useful. thoroughly recommended.
;
everything is ok, thank you very much! Product is good, no problems with download!
;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
Setting up the receiver
07
� Use or to set the distance of the subwoofer from the main listening position (within the range of 0.5 ft. to 45 ft.).
� When NO is selected in the subwoofer setting, the subwoofer distance can�t be set.
If Dolby Digital mode is switched on, you will hear the channel you have selected (either ch1 or ch2) through your center speaker. With Dolby Digital mode off, or if you don�t have a center speaker, you will hear the channel you have selected through both front speakers. In the Lch1.Rch2 setting, the left front speaker will play channel 1 and the right front speaker will play channel 2. � Use or to cycle through the possible dual mono settings.
Dynamic range control setting
� Default setting: OFF Dynamic range is the difference between the loudest and softest sounds in any given signal. With this setting, you can compress the dynamic range, so that low level sounds can be heard more easily (sounding relatively louder) yet louder sounds won�t be too overbearing. � Use or to set the dynamic range control (OFF, MAX, or MID).
Lch1.Rch2 ch2 ch1
Component video input settings
Here you tell the receiver what components you have hooked up to the component video jacks on the back of the receiver.
Component video 1:
� Default setting: DVD � When listening at low volumes, set to MAX for maximum dynamic range compression. � Dynamic range control is effective only when Dolby Digital and DTS signals are being played back. 1 Use or to assign the component video 1 input (DVD, TV, DVR or OFF).
Component video 2:
� Default setting: TV 2 Use or to assign the component video 2 input (DVD, TV, DVR or OFF).
Dual mono setting
� Default setting: ch1
Digital input settings
Here you tell the receiver what components you have hooked up to the coaxial and optical DIGITAL IN jacks on the back of the receiver. After you assign a component to a digital jack, whenever you select that component, (for example, a DVD player) the receiver automatically changes to the digital input setting and DIGITAL shows in the display.
The dual mono setting can only be used when listening to Dolby Digital and DTS signals with dual mono encoding. It is sometimes used when it is necessary to have one language on one channel and a different language on the other. With this setting you can choose which channel in the dual mono setting you want to listen to.
47
En
|
|
|
> |
|
