There are currently no product reviews.
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Excelent service, the manual is complete, very cheap and fast
The item received was as described, as expected. I was pleased with the order. Thank you.
% SIGNAL SELECT button
Use to select input signals for the digital components. First press DVD/LD, TV/SAT, MD/TAPE 1, CD or VCR 1 (+, Function buttons) to select the component, then press SIGNAL SELECT repeatedly to select one of the following: ANALOG : Selects the analog (R and L) audio signals. DIGITAL : Selects the digital audio signals. This receiver automatically detects and displays the format of the signal being input. AC-3 lights when Dolby Digital signals are input, DTS lights when DTS signals are input, and MPEG lights when MPEG signals are input. (AC-3 and DTS decoding is switched automatically.) â€¢ SIGNAL SELECT is fixed in the â€śANALOGâ€ť position for components not assigned to one of the four digital input jacks. â€¢ Because the audio from a karaoke microphone and LD recorded with analog audio only is not output from the digital output, set SIGNAL SELECT to â€śANALOGâ€ť. â€¢ This receiver can only play back Dolby Digital, PCM (32kHz, 44kHz, and 48kHz), DTS, and MPEG digital signal formats. With digital signal formats other than these, set SIGNAL SELECT to â€śANALOGâ€ť.
^ DSP MODE button
Press repeatedly to select a DSP sound mode (HALL 1, HALL 2, JAZZ, DANCE, THEATER 1, or THEATER 2). Use these modes to produce surround sound from standard (two channel) stereo sources.
& MIDNIGHT button
Press to hear effective surround sound at low volume levels. The effect is automatically adjusted according to the volume level.
* DIGITAL NR button
Switches DIGITAL NR on or off. Use to reduce noise in digital audio sources.
( MASTER VOLUME
After turning on the desired component, rotate to adjust the volume.
) PHONES jack
Connect headphones for private listening (the speakers turn off automatically).
_ STATION/FREQUENCY (+/â€“) button
STATION: Press to select the preset channel. FREQUENCY: Press to select the frequency.
+ Function buttons
Selects the function. Each press switches the DVD/LD input between DVD/LD and DVD 5.1 channel.
Â¡ TAPE 2 MONITOR button
Switches the TAPE 2 monitor on or off.
â„¢ VIDEO INPUT jacks
Connect a video camera, video game system, etc. to the VIDEO INPUT jacks.