There are currently no product reviews.
I am very happy with the owner's manual. I bought a used Casio and was so relieved that I was able to get a hold of a owner's manual. It was very easy to download the manual and I had no problems with printing it. Thank you! Nancy Whalen
The purchased manual is an high-quality scan of the original JVC paper-based OwnerΒ΄s Manual. I am very satisfied!
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
â¢ You can use speakers with a nominal impedance between 6 â¦ to 16 â¦ (please see Switching the speaker impedance on page 50 if you plan to use speakers with an impedance of less than 8 â¦). After selecting 2nd Zone in Surround back speaker setting on page 33, you can use the speakers connected to the (surround back) B speaker terminals on the rear panel to listen to stereo playback in another room. See Switching the speaker system below for the listening options with this setup.
Bi-amping your front speakers
Bi-amping is when you connect the high frequency driver and low frequency driver of your speakers to different amplifiers (in this case, to both front and surround back terminals) for better crossover performance. Your speakers must be bi-ampable to do this (having separate terminals for high and low) and the sound improvement will depend on the kind of speakers youâre using.
1 Connect a pair of speakers to the surround back speaker terminals on the rear panel. Connect them the same way you connected your speakers in Installing your speaker system on page 17. Make sure to review Placing the speakers on page 18
when placing the speakers in another room.
1 Connect your speakers as shown below. This illustration below shows the connections for biamping your front left speaker. Hook up your front right speaker in the same way.
SURROUND BACK /
2 Select â2nd Zoneâ from the âSurr Back Systemâ menu. See Surround back speaker setting on page 33 to do this.
Front left speaker
SEE INSTRUCTION MANUAL
Switching the speaker system
If you selected 2nd Zone in Surround back speaker setting on page 33, three speaker system settings are possible using the SPEAKERS button. If you selected Normal (SB) or Front Bi-Amp, the button will simply switch your main speaker system on or off. The options below are for the 2nd Zone setting only.1
â¢ Use the SPEAKERS button on the front panel to select a speaker system setting. As mentioned above, if you have selected Normal (SB), the button will simply switch your main speaker system (A) on or off. Press repeatedly to choose a speaker system option:
â¢ SP A â Sound is output from speaker system A and the same signal is output from the pre-out terminals. â¢ SP B â Sound is output from the two speakers connected to speaker system B. Multichannel sources will not be heard. The same signal is output from the surround back channel pre-out terminals. â¢ SP AB â Sound is output from speaker system A (up to 5 channels, depending on the source), the two speakers in speaker system B, and the subwoofer. The sound from speaker system B will be the same as the sound from speaker system A (multichannel sources will be downmixed to 2 channels). â¢ SP (off) â No sound is output from the speakers. The same sound is output from the pre-out terminals (including from your subwoofer, if connected) as when selecting speaker system A (above).
Since both front and surround back speaker terminals output the same audio, it doesnât matter which set (front or surround back) is powering which part (High or Low) of the speaker. â¢ Make sure that the + / â connections are properly inserted.
2 Select the âFront Bi-Ampâ setting from the âSurr Back Systemâ menu. See Surround back speaker setting on page 33 to specify how youâre using the surround back speaker terminals.
Caution â¢ Most speakers with both High and Low terminals have two metal plates that connect the High to the Low terminals. These must be removed when you are bi-amping the speakers or you could severely damage the amplifier. See your speaker manual for more information. â¢ If your speakers have a removable crossover network, make sure you do not remove it for bi-amping. Doing so may damage your speakers.
1 â¢ The subwoofer output depends on the settings you made in Manual speaker setup on page 37. However, if SP B is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed). â¢ Depending on the settings in Surround back speaker setting on page 33 output from the surround back pre-out terminals may change. â¢ All speaker systems (except 2nd Zone connections) are switched off when headphones are connected.