|
|
|
Who's Online
There currently are 5675 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Good price for the manual and easy to locate on the site and download. Plus, just like the original. Thanks a lot.
;
Genuine Service Manual. Link was available in less then an hour or so. Service Manual contains assembly, PCB layout, complete circuit diagram, Components list etc
;
Great and very well scanned Service Manual, also very fast download - Recomended !
;
I'm quite impressed. I had to wait 24 hours for my manual (quite a rare one) but I got it and the quality was good. Also, from trawling the web, these prices are by far the best.
;
Manuale perfetto. Ottimo e utilissimo. Grazie a questo manuale ho potuto realmente risolvere il complesso problema della stampante.
VSA-E03
Display
1
SIGNAL SELECT ANALOG DIGITAL AC-3 PRO LOGIC DIGITAL L CR LS S RS LFE
2
3
SFC ATT
45
6
7
8
DIRECT
9
H.P
0
SP AB
MIDNIGHT
LOUDNESS
dB
~ !
-
=
1 SIGNAL SELECT indicators
Light to indicate the type of input signal selected for the current component. ANALOG : Lights when the analog audio signals are selected. DIGITAL : Lights when the digital audio signals are selected. AC-3 : Lights when a source with Dolby Digital signals is played.
- Program format indicators
The following indicators light to show the channels being played back. L : Left front*1*2, C : Center*1, R : Right front*1*2, LS : Left surround*1, S : Surround (mono)*2, RS : Right surround*1 *1: Indicates 5.1ch Dolby Digital playback. *2: Indicates Dolby Pro Logic playback.
2 Digital indicators
PRO LOGIC : When the Dolby Surround mode on the amplifier is on, this indicator lights during 2 channel playback of Dolby Digital sources. DIGITAL : When the Dolby Surround mode on the amplifier is on, this indicator lights to indicate playback of a Dolby Digital signal. However, PRO LOGIC lights during 2 channel playback of Dolby Digital.
= LFE indicator
LFE (Low Frequency Effects) indicator lights to indicate that the program source contains an LFE channel. The indicator to the left of LFE lights during actual playback of the LFE signals (LFE signals are not present in all parts of the sound track).
3 SFC (DSP) mode indicator
Lights when the DSP mode is selected.
~ Character display ! Volume level display
Displays the volume level. Volume level is maintained even when the power is off. ---dB indicates the minimum level, and 0dB indicates the maximum level. � Depending on the level settings for individual channels, the MAX level can range between �10dB and 0dB.
4 ATT indicator
Lights when ATT is used to reduce the level of the input signal (available in ANALOG mode only).
5 Overload indicator
When �ANALOG� is selected in SIGNAL SELECT, this indicator lights to show that an excessively strong signal is being processed. When this occurs, press ATT on the remote control to attenuate the signal.
6 MIDNIGHT indicator
Lights when the MIDNIGHT mode is on.
7 LOUDNESS indicator
Lights when loudness is on.
8 DIRECT indicator
Lights when direct playback is on.
9 H.P indicator
Lights when headphones are plugged in.
0 Speaker indicators
Light to indicate the current speaker system. SP 3 A : Lights when speaker system A is selected. SP 3 B : Lights when speaker system B is selected.
59
|
|
|
> |
|
