5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Text excerpt from page 1 (click to view)
Read before removing your speakers from their packaging.
2. Using a screwdriver, remove the bolts and washers (4 in all) from the back side of the packaging and open and remove the outer carton.
Outer carton
TAD Reference One Unpacking instructions
This speaker set is extremely heavy (150 kg, or 330 lb). Be sure to carry out unpacking and installation with at least three people. Trying to handle too much weight can throw you off balance, causing you to fall or otherwise incur bodily injury.
Bolts
Caution: About installation
� This unit is sold with the understanding that it is to be installed by a properly trained and equipped specialist. All matters concerning installation and mounting should be handled by specialists or by your local dealer. � Pioneer waives all responsibility for damages to this unit as the result of improper installation, mounting,improper use, remodeling/alteration, and natural disasters.
1. Cut the four straps from the packaging and remove the lid.
Straps
3. Remove the inner carton by peeling off the tape (3 pieces in total) from the back corner and then opening the carton. Remove the tape that secures the accessory kit in place and take out the kit before fully removing the inner carton.
