|
|
|
Who's Online
There currently are 5794 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
everything is ok, thank you very much! Product is good, no problems with download!
;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
8 Using the Timer
Setting the Sleep Timer
When setting the sleep timer, you only have to tell the system when to switch off. SET TIMER
AUX/CD-R STANDBY/ ON SOUND DISPLAY SET MD REC TAPE TIMER/
&
$ !�
� +�
VOL
CHARACTER CANCEL
4
¢
1
Select SLEEP TIMER from the timer menu.
Remember: switch between timer menu options using the $ and � buttons; select the option by pressing SET.
2
After choosing one of the sleep options, the display dims Tip
AUTO
Select a time option:
Use the $ and � buttons to switch between options, then press SET. $ SLEEP AUTO � SLEEP 90 - SLEEP 60 - SLEEP 30 - SLEEP OFF
will not be available if a CD or MD is playing in repeat mode (see p.25), or if a tape is playing in endless mode (see p.33). If you select AUTO, then subsequently start playing something in repeat or endless mode, the sleep timer will change automatically to the 90 minute setting.
plays the current CD, tape or MD out, then switches off the system. 90, 60 and 30 options switch off the system after 90, 60 and 30 minutes, respectively; OFF cancels the sleep timer if it was previously set. The little moon indicator lights in the display to show the sleep timer is set and the display dims. To check how much time is left on the sleep timer, select SLEEP TIMER from the timer menu, then press SET. The display shows the remaining time.
AUTO
Setting Up a Future Recording
You can set the timer to record something from either the tuner or a component connected to the AUX/CD-R inputs. For example, you might want to record a programme on the radio that is broadcast while you're at work. If you're recording from an auxiliary component it must also be able to switch on at the time the recording starts �this system can't control it �or you have to leave it switched on until the recording has finished. Timer recording works with either the tape deck or the optional MD recorder. During the actual recording, the volume is automatically set to minimum. SET TIMER
AUX/CD-R STANDBY/ ON
SOUND
DISPLAY
SET
MD REC
TAPE
TIMER/
&
CHARACTER CANCEL
$ !�
� +�
VOL
4
¢
40
|
|
|
> |
|
