|
Who's Online
There currently are 5915 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Another excellent buy! A fully readable PDF archive. Good prints!!
;
It is wonderful done!!! a great job in scanning the manual. Superior quality in all the electric scheme. Very understandable and net!!! Thank you!
;
muy buen manual por lo completo de este algunos esquemas estan muy divididos lo que hace algo dificil el seguimiento.
;
very good manual, with detail and clarity in esquematic diagrams and waveforms .
;
Very quality copy of original service manual, which contains the circuit diagrams, PCB and lists of components, well as recommendation for calibration procedures of device, also everything else, that need for repair, tuning and use this oscilloscope.
All presented copies have high-resolution, so you can view all in detail.
This manual will very useful for simple owners and for repairers.
I recommend these manual, because myself is owner of Philips PM3216 and I need sometimes servicing these oscilloscope (principally calibrating).
Also, these document is an example of excellent design of technical documentation.
Front
Surround Center
ORDER NO.
S-DVR9ST
RRV3021
SPEAKER SYSTEM
S-DVR9ST
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
CS Assy ( Front Speaker ) The grille assy is attached to the cabinet by press-fitting. To detach it, remove the top board by inserting a flat blade screwdriver into the cabinet upper side. Then pry it open by inserting a flat blade screwdriver between the grille and the cabinet. The speaker unit is atached to the cabinet by 4 internal screws. To detach it, first two screws of a connection part with a SP stand are removed. Next the screw of a front cabinet is removed and the hexagon socket screw of a top Plate is removed. And the screw which is fixing the SP unit is removed and a cable is removed. When attaching it, face its terminal toward the input terminal. CS Assy ( Surround Speaker ) The grille assy is attached to the cabinet by its bosses. To detach it, remove the stand by inserting a flat blade screwdriver into the cabinet lower side. Then pry it open by inserting a flat blade screwdriver into the grille slot. The speaker unit is attached to the front cabinet by 4 external screws. To detach it, first remove the stand and the grille assy like above. Next unfasten those screws. Then remove the cable. When attaching it, face its terminal downward.
XTW/EW
CS Assy ( Center Speaker ) The grille assy is attached to the cabinet by its bosses. To detach it, remove the top board by inserting a flat blade screwdriver into the cabinet upper side. Then pry it open by inserting a flat blade screwdriver between the grille and the cabinet. The speaker unit is attached to the cabinet by 4 internal screws. To detach it, first unfasten screws of the bottom stand. Next remove screws for the cabinet and SP unit. Then remove the cable. When attaching it, face its terminal toward the input terminal.
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
T � ZZE SEPT. 2004 Printed in Japan
|
|
|
> |
|