PIONEER SDV-P7/ES/RD
Quick Start

Installation
2. Fastening the unit to the factory radio mounting bracket. (Fig. 12) (Fig. 13)
Select a position where the screw holes of the bracket and the screw holes of this unit become aligned (are fitted), and tighten the screws at 2 places on each side. Use either truss screws (5 � 8 mm) or flush surface screws (5 � 9 mm), depending on the shape of the screw holes in the bracket.

<ENGLISH>
Mounting with Brackets

Tapping screw (6 � 16 mm)

10

Truss screw (5 � 8 mm)

Bracket

Fig. 12

Car mat or chassis

Screw 11

Drill 4 to 4.5 mm diameter holes.

Fig. 14
Dashboard or Console 13

Factory radio mounting bracket 12

Fig. 13