|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It's a grate service manuals.Have many details and the writing it's so clear.You have all you want in manual,nothing missing,belive me.I'm verry satisfied of this manual.
;
Great scanned service manual
Usefull informations.
I will buy again!
Best Regards
;
The manual describes this product very good. It has the basic things to know and also a more detailed look. Very well made!
;
An excellent document to assist in the repair of my old personal tape player. It includes full circuit diagrams and physical layout drawings and full instructions on disassembly and fault finding.
Well worth the meagre price.
;
Very good conversation, Pretty fast Service, wood do it again,
Have paid by Paypal, so i got the Service Manual online after 15 Min.
Very helpfully.
Greeting from Germany,
Hans
5
8. OPERATIONS
5
Gain Control Power Indicator
If the sound level is too low, even when The power indicator lights when the volume of the car stereo used along power is switched on. with this power amplifier is turned up, turn gain control on front of the power amplifier clockwise. If the sound distorts when the volume is turned up,
BFC (Beat Frequency Control) Switch turn the gain control counter-clockwise.
MW/LW broadcast with your car stereo, change the BFC switch using a small stanan RCA equipped Pioneer car stereo with dard tip screwdriver. max. output of 4 V or more, adjust level to
6
� When using with an RCA equipped car If you hear a beat while listening to an
stereo (standard output of 500 mV), set to the NORMAL position. When using with
6
match the car stereo output level.
PRS-A500/X1H/EW
Cut Off Frequency Control LPF (Low-Pass Filter)/HPF (High-Pass Filter) Select Switch
7
7 LPF (Left) * � 40 to 120 Hz Subwoofer Connect a subwoofer. OFF (Center) Full range HPF (Right) * 40 120 Hz � Full range Use if you want to cut the * See the �Cut Off Frequency Control� section. D E
If the LPF/HPF select switch is set to Set LPF/HPF select switch as follows according to the type of speaker that is connected LPF or HPF, you can select a cut off to speaker output connector and the car stereo system: frequency from 40 to 120 Hz. LPF/HPF Select Audio frequency range Speaker Remarks Switch to be output Type
very low frequency range* because it is not necessary for the speakers you are using. 8
8 B A C
27
F
|
|
|
> |
|