Fast Download,all pages present,an excellent copy.THis enabled to find the origional part numbers and chase them up. The cartridge is proving difficult to find but at least I know the origional part number.Thanks to all.
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
Text excerpt from page 8 (click to view)
3.2 D.D MOTOR 1. Remove the 3 D.D motor securing screws. 2. Disconnect D.D motor connector. the
3.3 TONEARM 1. Remove the plate pressing against the tonearm output cable. 2. Remove the coil & rail ass'y. 3. Disconnect the ground lead connected to the front rail from P.C.B. 4. Remove the E-type washers and screw holding the gear and rail of the elevation mechanism. The front rail may then be removed by pulling
Fis.3-2 out towards the right. 5. The other rail may also be removed by pulling out to the right after loosening the securing screw. 6. The tonearm may be removed once both rails have been pulled across to the right by at least 15cm.