|
Who's Online
There currently are 5868 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
First class Service,
best quality, come again
Thank You.
vac
;
I didn't realise a manual for an early plasma TV such as the one we were gifted could be so easily obtained. No manual was supplied with it, and as senior citizens we were a little puzzled over some aspects of its use. I do not want a listing for your store credit as we are not fairly big computer users. The manual was well organised, as it should be, with its backing of the Pioneer name. The download was prompt and everything worked quite smoothly. Thank you. Gordon.
;
Thank you very much for the manual. It is what I needed and it will be very helpful to me. The delivery of the manual was easy and very fast. I strongly recommend this site to other users. Best regards.
;
Excellent!! Got what I need and very fast!! Thank You
;
Manual acquired with good resolution, complete in all its pages, very good policy of the folder where are saved all products purchased.
1
2
3
4
No sound from the speakers (2/2)
A
A
No sound from the sub-woofer No
Is it sound for every function that doesn't come out? No
Is sound muting set? No
Yes
Cancel muting then check again.
Is a signal output from IC8002?
B
Yes
B
Check around IC8002 and No check the communications between IC8002 and the microcomputer.
Is the volume set to 0? No Are the headphones connected? No Is a signal output from IC8003? (3), (13)
Yes
Raise the volume then check again.
Yes
Has the signal arrived at TP8668 and TP8667?
No Check around IC8003 and check the buffer circuits.
Disconnect the headphones then check again.
45 46
Yes Has the signal arrived at TP9301 and TP9303?
B
Check the flexible cables No between the AV BOARD Assy and MR MAIN BOARD Assy
No Check around IC8003 and
34 35
Yes
B
No
check each input signal.
47 48
Yes Has the symptom been settled when the system cable is replaced? Yes
B
No
and between the MR MAIN BOARD Assy and MDR Assy.
Is a signal output from IC8008? (7), (10) Yes
36 37
B
No
Check around IC8008.
C
The panel is defective.
Is a signal output from IC8007? (1), (7)
Check around IC8007.
38 39
Yes
B
No
Finishing troubleshooting
Has the signal arrived at TP7710?
Check around Q7761.
49
Yes
B
Check around the jack.
D
E
F
134
1 2
PDP-R04E
3 4
|
|
|
> |
|