This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
Text excerpt from page 89 (click to view)
PDP-505HD
2. VIDEO ASSY
Note) Shield Case of Video Assy should not touch the heat sink at the primary side of Main Power Assy in standing Video Assy. (Noise may be generated and that may break the Main Power Assy)
4
Release Video Assy from PCB Hinge
1
Remove a screw
1
Remove a screw
3 3
Remove the harness from Wire Saddle VIDEO ASSY Remove the harness from Wire Saddle
2
Remove all screws and nuts from Terminal Panel
VIDEO ASSY
5
After pulling VIDEO Assy backward to release it from Terminal Panel, insert it to the PCB Hinge again.