|
Who's Online
There currently are 5902 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Really good quality, аll readable.! Wonderful work shop. I recommend to all!
;
Good quality service manual.The scheme is on A3 format and very readable.Thank you
;
Very good service-manual with clear electrical diagrams. Thanks you.
;
the manual is in quite good quality and it's in pdf. manual was send in less then 6h.
;
Absolutely top, I've got now all Service-Manuals I'll need to repair my Mackie-Mixer!
PDP-433CMX, PDP-433MXE
Y DRIVE, SCAN (A) and (B) Assemblies
1
Remove the three screws.
7 8 9
Remove the Rear Case (M). (Screws � 20) Remove the Y DRIVE Assy. (Connector, PCB Spacer � 3, Screws � 8) Remove the Front Chassis V. (Screws � 5)
10 Remove the Scan IC Spring 43L and 43R. (Screws � 1)
Front Case Assy 43 (M)
2 3 4
Loosen a rivet. Remove the Lead Cover MX. Pull out a Flexible Cable.
1
�3
Scan IC Spring (43L)
9 8
�2
Y DRIVE Assy
8
�2
9
SIDE KEY Assy Front Chassis V
10
9 8
�2
8
2
4
Lead Cover MX Scan IC Spring (43R)
8
�2
Rivet 3 Turn it not to press the rivet. (Because when the rivet presses, Lead Cover MX fit in once again.) It is easy to remove when pull out the Lead Cover MX with the rivet before completely removing the rivet.
9
9 5 6
Remove bottom by the fulcrum at the top of Front Case Assy 43 (M). Remove the Front Case Assy 43 (M).
Front Case Assy 43 (M)
11 Reverse the SCAN (A) and SCAN (B) Assemblies.
Rear Case
12 When it is necessary, exchange the ROM.
6
Aluminum Materials It is the structure that a hook of Front Case Assy 43 (M) was put between with Rear Case and aluminum materials. ROM �6 SCAN (A) Assy ROM �6
11
11
5
SCAN (B) Assy
139
|
|
|
> |
|