|
There are currently no product reviews.
 ;
Excellent manual - just what I needed. Although currently available only in German, their are lots of pictures which makes it all very clear.
;
Good quality instructions manual. Very useful to me. Quick and excellent service from Owner-Manuals... Thanks !!!
 ;
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
;
I did not have the manual for a Whirl Pool gas dryer, therefore I purchased it from Owner-manuals. This is exactly what I needed. Thank you for the service.
;
Easy to access. Clear instructions. No problems. Printed fine.
System Settings
Setting the onscreen display language
The onscreen display language has been set to Chinese as the factory default. To change to English, the screen setting must be changed. Follow the procedures below to change the setting.
4
Use the 2/3 buttons to select [OPTION].
èœå•
å›¾åƒ å±å¹•è®¾å®š
LANGUAGE çœç”µè®¾å®š ç”»é¢ç®¡ç†æ¨¡å¼ å±å¹•é˜²ç¼ä¼¤ å±ä¿æŽ§åˆ¶ è‡ªåŠ¨è®¾å®šæ¨¡å¼ è‡ªåŠ¨åŠŸèƒ½ 音频输出
输入１
选项
English System Settings
设定
: ä¸æ–‡ : æ ‡å‡† :å…³ :å…³ :å¼€ : å…³é— :å…³ : 固定
SET
确认
MENU
退出
MENU 5/∞ 2/3 SET
STANDBY/ ON
5
Use the 5/∞ buttons to select [LANGUAGE], then press the SET button.
MENU 2/3 SET 5/∞
LANGUAGE
SET
:
MENU
ä¸æ–‡
退出
设定
Display operating panel
Remote control unit
1 2 3
Set the rear panel MAIN POWER switch to ON. The STANDBY indicator on the front panel will light red. Press the STANDBY/ON button to turn the power ON. The ON indicator on the front panel will light green. Press the MENU button to display the menu screen.
èœå•
图åƒ
对比度 明亮度 色彩 色调 é”度 图åƒé»˜è®¤å€¼è¿˜åŽŸ
6
Use the 2/3 buttons to select [ENGLISH]. Each time the 2/3 buttons are pressed, the language alternates between those available, in the following order:
3 ENGLISH 2
输入１
å±å¹•è®¾å®š
: : : : : 0 0 0 0 0 L A N G UAG E
SET
设定
选项
:
ENGLISH
MENU
设定
退出
SET
确认
MENU
退出
7
With the desired language displayed, press the SET button. The selected language will be set in memory, and the screen will return to that shown in step 4. When settings are completed, press the MENU button to return to the normal screen image.
8
Note
When the onscreen display language is set to any of INPUT 1 to INPUT 5, the same display language will be set, regardless of the type of input.
18
En
|
