|
Who's Online
There currently are 5887 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
;
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
;
complete part-lists and pcb layout, schematic diagram is good enlargable,
;
Excellent, fast delivery, excellent product. Good luck!
;
This manual is for the usa model only. But it is clear
, accurate and comprehensive, including board layouts and schematics.
I found it extremely useful for my mitsubishi dp-86da, but the same diagram would also work for the realistic lab5000 and hi fi 80. Thanks.
PDA-5001
8. PANEL FACILITIES AND SPECIFICATIONS
PANEL FACILITIES
1
2
3
�
+
AUDIO OUTPUT IN OUT IN OUT COMBINATION CONTROL RS-232C
(INPUT 4)
R SPEAKER 8 � � 16 �
R
(INPUT 3)
�
L
AUDIO INPUT
ANALOG RGB INPUT4
OUTPUT (ANALOG( RGB
4
5
6
7
8
9
0
-
1 AUDIO INPUT (Pin jacks)
Use to obtain sound when INPUT2 (BNC/S) is selected. Connect the audio output jack of components connected to INPUT2 (BNC/S) to these jacks.
7 CONTROL IN/OUT
For connection of PIONEER components that bear the � mark. Making CONTROL connection enables control of this unit as a component in a system.
2 AUDIO INPUT (Pin jacks)
Use to obtain sound when INPUT1 (BNC) is selected. Connect the audio output jack of components connected to INPUT1 (BNC) to these jacks.
8 RS-232C
DO NOT MAKE ANY CONNECTIONS TO THIS TERMINAL. This terminal is used in the factory setup.
3 INPUT1 (BNC)
For connection of components that have a composite video output jack. Use the INPUT1 OUT jack to output the video signal to an external monitor or other component. Note: The video signal will not be output from the INPUT1 OUT jack when the main power of the plasma display is off or in standby mode .
9 AUDIO INPUT (Stereo mini jack)
Use to obtain sound when INPUT4 is selected. Connect the audio output jack of components connected to INPUT4 to this jack.
0 AUDIO INPUT (Pin jacks)
Use to obtain sound when INPUT3 is selected. Connect the audio output jack of components connected to INPUT3 to these jacks. Note: The left audio channel (L) jack is not compatible with monaural input sources.
4 SPEAKER (R) terminal
For connection of an external right speaker. Connect a speaker whose impedance is 8 -16 �.
- INPUT4
For connection of a personal computer (PC) or similar component. Make sure that the connection made corresponds to the format of the signal output from the connected component. Use the INPUT4 OUTPUT terminal to output the video signal to an external monitor or other component. Note: The video signal will not be output from the INPUT4 OUTPUT terminal when the main power of the plasma display is off or in standby mode .
5 AUDIO OUTPUT (Stereo mini jack)
Use to output the audio of the selected source component connected to this unit.
6 COMBINATION IN/OUT
DO NOT MAKE ANY CONNECTIONS TO THESE TERMINALS. These terminals are used in the factory setup.
26
|
|
|
> |
|