|
Who's Online
There currently are 6012 guests and 6 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Great service! I got manual to my sony receiver for very reasonoble price.
;
Good service, well organized. Cheap, and the service manual was as expected. A valuable service for those of us wanting to keep the old junk going!
;
The manual arrived very quickly and had all the information I needed - Very satisfied with this seller. - Thanks -
;
Good quality, the manual help me to repair the echo/reverb section
;
A good service manual with lots of info and a very fair price
1
2
3
4
7. DISASSEMBLY
A
(Caution) 1) Approximately one hour after activating, the temperature on part of outer surface reaches nearly 70 oC. Therefore, be careful not to get burn, immediately after turning off power. 2) Watch out for a hot heat sink. Operations while removing a heat sink can cause failure. 3) As a heat sink (approx. 250 g to 300 g) is heavy comparing with the product weight (approx. 900 g). Keep a balance when taking out the board.
Removing the Case (Fig.1)
ND-G500/XS/E5
1
B
Remove the eight screws and then remove the Case.
1
Case
1
1
1
C
1
1
1
1
Fig.1
Removing the Amp Unit (Fig.2)
Heat Sink
1 1 1 1
1
D
Remove the six screws and then separate the Heat Sink and the Chassis.
1
1
Chassis Chassis Heat Sink
2
Remove the five screws and then remove the Amp Unit. (Note) While fixing a heat sink to a chassis, Amp Unit cannot be removed. Meanwhile, even if screws are taken out, the heat sink is not removed from the chassis. (The heat sink is removed together with Amp Unit. They cannot be removed separately.)
2
2
E
2
2
F
2
Amp Unit
Fig.2
10
ND-G500/XS/E5
1 2 3 4
|
|
|
> |
|