There are currently no product reviews.
Another excellent buy! A fully readable PDF archive. Good prints!!
It is wonderful done!!! a great job in scanning the manual. Superior quality in all the electric scheme. Very understandable and net!!! Thank you!
muy buen manual por lo completo de este algunos esquemas estan muy divididos lo que hace algo dificil el seguimiento.
very good manual, with detail and clarity in esquematic diagrams and waveforms .
Very quality copy of original service manual, which contains the circuit diagrams, PCB and lists of components, well as recommendation for calibration procedures of device, also everything else, that need for repair, tuning and use this oscilloscope.
All presented copies have high-resolution, so you can view all in detail.
This manual will very useful for simple owners and for repairers.
I recommend these manual, because myself is owner of Philips PM3216 and I need sometimes servicing these oscilloscope (principally calibrating).
Also, these document is an example of excellent design of technical documentation.
Details of Error Display
Can' t Edit
Details of Error
Ã· Editing conditions were not satisfied for each editing function.
Ã· Operating method is wrong. Try again using correct method. Ã· Check according to TROUBLESHOOTING. Ã· Faulty TOC or UTOC data or scratch on disc. Replaced with other discs.
Temp Over Disc ERR Disc ERR R Disc ERR S Disc ERR W
Ã· Temperature inside unit (MD unit) was too high due to fault. Ã· Data read was incorrect or could not be read properly. Ã· Error occurred during music data recording and recording could not be performed correctly. Ã· Music data READ search time exceeded Ã· REC PAUSE shift abnormality (search time exceeded) Ã· SD WRITE (search time exceeded)
UTOC W ERR
Ã· Fault occurred during rewriting of UTOC rewriting, and rewriting could not be performed correctly. Ã· The DRAM has become filled with music data, but they can not be written (to the disc).
Ã· Scratch on disc. Replaced with other discs.
Ã· Check if there are scratches, dusts, fingerprints, or black spots on disc. Check if disc fluctuates eccentrically or moves up and down largely. Ã· Record and check if disc is recordable. Ã· Check if there are scratches, dusts, fingerprints, or black spots on disc. Check if disc fluctuates eccentrically or moves up and down largely. Ã· Check to see if the recording head contact is correct or if there are any disconnections between the board and the recording head. Ã· Try doing a RESET operation again. If the problem still persists, replace the EEPROM.
Ã· After reading UTOC, total number of TNO and NAME characters was 0. Ã· Focus execution error, etc. occurred due to shock during RECPLAY.
UTOC W ERR
Ã· UTOC read was correct but could not be rewrite it.
Ã· The EEPROM data are incorrect.
Ã· Ã· Ã· Ã·
Never completes EJECT. Never moves HEAD UP. Never moves HEAD DOWN. The set microcomputer and MD mechanism microcomputer are not communicating properly.