Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Text excerpt from page 42 (click to view)
KEH-P424,P4700,P4750
7.2 DISASSEMBLY
- Removing the Case(not shown) 1. Remove the three screws. 2. Remove the Case. - Removing the Cassette Mechanism Module
(not shown)
1. Remove the four screws. 2.Disconnect the connector, and then removing the Cassette Mechanism Module. - Removing the Detach Grille Assy(Fig.22) 1. Push the detach button. 2. Remove the Detach Grille Assy. - Removing the Panel Unit(Fig.22) 1. Disengage the stopper at four locations indicated by white-arrows and then remove the Panel. 2. Disengage the stopper at two locations indicated by black-arrows. 3. Remove the Panel Unit.
Fig. 22
- Removing the Tuner Amp Unit(Fig.23) 1. Removing the two screws A, three screws B and screw C. 2. Unbend the tabs at four locations indicated by arrow until straight. 3. Remove the Tuner Amp Unit.