|
Who's Online
There currently are 5893 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
As the only source for this manual it rather rank quite high since it is well scanned and perfectly readable.
;
the manual is in good quality and it's in pdf. manual was send in less then 24h.
regards
mike
;
I would not plug this machine in without finding a manual like this. In addition to setup and normal operating instructions, it has troubleshooting flowcharts, diagrammed mechanical adjustments, and schematics to beat the band. The tech I hand it to would be thrilled to find solder side PCB diagrams with component outlines superimposed, pinouts for every IC chip, and line drawings of transistors, with labeled legs.
As for printing quality, this may be a copy of a copy, but even the finest print when enlarged is very legible. There is a bit of grayed print over a few pages, as if a wet page were placed over it, but the print is still very legible. If you could borrow an original manual and get it printed and bound for 4 to 6 times the cost, you could get better quality. In that case you wouldn't be here. For price, utility, and availability I am rating this manual highly.
;
I received the Manual in a timely manner and it was exactly what I needed.
This is a perfect copy of the Service Manual, The quality is great. I am very
happy. Thank you
;
exactly as they say. Within 24 hours the link to the pages and offcourse it was the right service manual. Super and thanks
KEH-P424,P4700,P4750
7.2 DISASSEMBLY
- Removing the Case(not shown) 1. Remove the three screws. 2. Remove the Case. - Removing the Cassette Mechanism Module
(not shown)
1. Remove the four screws. 2.Disconnect the connector, and then removing the Cassette Mechanism Module. - Removing the Detach Grille Assy(Fig.22) 1. Push the detach button. 2. Remove the Detach Grille Assy. - Removing the Panel Unit(Fig.22) 1. Disengage the stopper at four locations indicated by white-arrows and then remove the Panel. 2. Disengage the stopper at two locations indicated by black-arrows. 3. Remove the Panel Unit.
Fig. 22
- Removing the Tuner Amp Unit(Fig.23) 1. Removing the two screws A, three screws B and screw C. 2. Unbend the tabs at four locations indicated by arrow until straight. 3. Remove the Tuner Amp Unit.
Fig. 23
42
|
|
|
> |
|