I have never bought a service manual which is as competely readable as this althogh it was a scanned pdf. Thank you for this succesful manual also cheaper than other sites.
Thanks for a very good and readable servicemanual. Just what I needed as a "dinosaur technician". I really recommmend this site and will come back.
Åsbjörn
The manual is great help for me, i'm happy to have it,thanks
Text excerpt from page 23 (click to view)
5
6
7
8
HTV-SW1, HTV-C1
A
-28
2
B
1
C
¶ In regard to the voltage at pin 22 of IC5001 (LEVEL IN)
� This terminal monitors the input signal level for operation of the automatic standby mode. � When INPUT key (INPUT 2) is selected and -46dB V (about 5mV rms) is applied as input (input to both channels, freq. =1kHz), this terminal rises to about 0.8V DC (in case of both channels, -40 dB V, about 0.8V DC) and POWER ON is effected.
D