Everything was great, the manual, the response time, the simplicity of the order, and the
Price. The only thing that I could possible say on a negative note would be that the manual I ordered was more for a service tech. There were a lot of schematic diagrams that didn't help me solve the problem. However I would order again and recommend the web sight to others.
very complete. acceptable resolution. details are a little unclear. is a manual note 8.
Text excerpt from page 23 (click to view)
5
6
7
8
HTV-SW1, HTV-C1
A
-28
2
B
1
C
¶ In regard to the voltage at pin 22 of IC5001 (LEVEL IN)
� This terminal monitors the input signal level for operation of the automatic standby mode. � When INPUT key (INPUT 2) is selected and -46dB V (about 5mV rms) is applied as input (input to both channels, freq. =1kHz), this terminal rises to about 0.8V DC (in case of both channels, -40 dB V, about 0.8V DC) and POWER ON is effected.
D