|
Who's Online
There currently are 5859 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Dear Sirs,
Thank you for the fast support, the manual does provide all necessary information to repair the radio. All schematics are in a good quality for reading.
The manual fits 100% to my requirements as a technican.
Kind regards Thomas
;
the big video recorder format s-vhs many features delicate in loading system of the cassette. Such machines are no longer manufactured, it would be too expensive.
;
THIS MANUAL IS VERY GOOD AND VERY CLEAR
PLEASE NOTE IT DOES NOT CONTAIN THE SETUP INFORMATION TO ALIGHN THE GEARS IN THE CD MECH IT DOES SHOW ALL THE PARTS AND THEIR LOCATIONS .
;
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
;
High quality scan of original Service Manual. Everything´s fine!
GM-X422, GM-X322
16
Gain Control Power Indicator
The power indicator lights If sound is too low, even when the
volume of the car stereo used along with power is switched on. this power amplifier is turned up, turn gain control on back of the power amplifier clockwise. If the sound distorts when the volume is turned up, turn the gain control counter-clockwise.
- SETTING THE UNIT
� Set the gain control to �NORMAL� when BFC (Beat Frequency Control)
this amplifier is connected to a Pioneer car stereo with RCA output jacks. If the sound Switch is too low or distorts, adjust the gain control. (ES and EW models)
8. OPERATIONS AND SPECIFICATIONS
If you hear a beat while listening to an AM broadcast with your car stereo, change the BFC switch using a small screwdriver.
LPF (Low-Pass Filter)/HPF (High-Pass Filter) Select Switch
Set LPF/HPF select switch as follows according to type of the that is connected to speaker output connector and the car stereo system:
LPF/HPF Select Audio frequency range Speaker Remarks Switch to be output Type
LPF (left) Very-low-frequency range Sub-woofer Connect a sub-woofer.
OFF (center) Full range
Bass Boost Level Control
Bass control can boost the level because it is not necessary control. around frequency selected by the bass � Level Control, Bass Boost for the speaker you use. boost frequency control 0 to 12 dB. Frequency Control can be adjusted only
Bass Boost Frequency Control (GM-X422)
HPF (right) Low-frequency range Tweeter If you want to cut the veryYou can select a bass boost frequency
high-frequency low-frequency range from 40 to 120 Hz with the bass boost
when the LPF/HPF select switch is set to a position other than HPF.
Fig. 8
|
|
|
> |
|