PIONEER EFX-1000/TLTXJ
Owner's Manual

EFFECTS (Digital Jog Break)

Digital Jog Break
1. JET effect
A time-shifted sound is applied to the original, thus producing the effect of a jet airplane ascending or descending (flange effect). ÷ The Jog dial is used to change the frequency range that is affected by the flange effect.

3. PHASE SHIFTER effect
A phase-shifted sound is added to the original, thus producing a phase shifter effect. ÷ The Jog dial is used to change the frequency range that is affected by the phase effect.

÷ The DEPTH dial can be used to adjust the Jog dial�s variable range (step).
DEPTH DEPTH

MIN

MAX

REV

FWD

Jog dial Phase effect change Flange effect change REV FWD Jog dial Jog dial Zip block Reverb block REV FWD

÷ The CHARACTER dial can be used to adjust the reverb effect

÷ The amount of resonance is changed using the DEPTH dial to emphasize the flange effect. (When approaching the [MAX] setting, the level of the sound increases.) ÷ The CHARACTER dial can be used to adjust the reverb effect.
Reverb block

÷ The amount of resonance is changed using the DEPTH dial to emphasize the phase effect. (When approaching the [MAX] setting, the level of the sound increases.) ÷ The CHARACTER dial can be used to adjust the reverb effect.
Phase shifter block Reverb block

÷ The MIX dial can be used to adjust the levels of the zip+reverb and original sounds.

6. HUMANIZER effect
The original sound is modified to resemble the vowel sounds of the human voice. ÷ The Jog dial is used to vary the vowel sound coloration.

Jet block

÷ The MIX dial can be used to adjust the levels of the jet + reverb sound and original sound.

÷ The MIX dial can be used to adjust the levels of the phase shifter + reverb sound and the original sound.

REV

FWD

Jog dial

2. WAH effect
The filter�s cutoff frequency is shifted, causing great change in the sound tone. ÷ The Jog dial is used to vary the filter�s cutoff frequency.

4. RING modulator effect

By modulating the original sound in the shape of a sine wave, the resulting sound coloration resembles a ringing bell. ÷ The Jog dial is used to vary the sine wave frequency.

÷ The DEPTH dial is used to change the unique coloring of vowel sounds by adjusting the amount of resonance. (When approaching the [MAX] setting, the level of the sound increases.) ÷ The CHARACTER dial can be used to adjust the reverb effect.

Frequency Jog dial REV Jog dial FWD

Humanizer block

Reverb block

Frequency Jog dial

÷ The DEPTH dial can be used to adjust the amplitude of the sine wave. ÷ The CHARACTER dial can be used to adjust the reverb effect.
Reverb block

÷ The MIX dial can be used to adjust the levels of the humanizer + reverb and the original sounds.

7. VOCODER effect
The input sound is replaced by an internally generated signal sound, producing a mechanical sound effect. ÷ The Jog dial is used to change the frequency of the internally generated signal sound. ÷ The DEPTH dial can be used to vary the internally generated sound from the basic sound to a chord. (The sound more nearly approximates the chord as the adjustment approaches the [MAX] setting.) ÷ The CHARACTER dial can be used to change chords codes. Selectable codes include Minor (MIN), Minor7, 7, Major (center position), Major7, Sus4, and Add9 (MAX).

÷ The DEPTH dial is used to change the unique coloring of the sound by adjusting the amount of resonance. (When approaching the [MAX] setting, the level of the sound increases.)
DEPTH

Ring block

÷ The MIX dial can be used to adjust the levels of the ring + reverb and original sounds.

MIN

Frequency

DEPTH

5. ZIP effect
Frequency
DEPTH

The Jog dial is used to change the pitch.
Up (about 1 octave) � Original Pitch sound � Down (about 15 octaves) REV FWD

MAX

Frequency

÷ The CHARACTER dial can be used to adjust the reverb effect.
Wah block Reverb block

Vocoder block

÷ The MIX dial can be used to adjust the levels of the wah + reverb sound and the original sound.

Jog dial

÷ The MIX dial can be used to adjust the levels of the vocoder and original sounds.

12
<DRB1369>