This is a good quality scan of the original Service Manual from Nordmende, Germany. Contains the circuit diagram, PCB layout, adjust/tune instructions as well. It is NOT in English but in GERMAN language! That was quite right for my german friend from the lower east side in Berlin.
Received via e-mail this PDF manual is worth the money. This is a quality scan of a manual in excellent condition and is just as good as having the original manual in hand. I have later seen the original manual and it was printed in colour, but this particular manual is black & white but scan resolution is high end quality! All drawings and pictures are presented in great detail. So, nearly perfect score in my opinion.
If you own the turntable you also should own the manual!
Great product. Recieved it fast...exactly as advertised.
Text excerpt from page 59 (click to view)
DVR-S201
SERVO MECHANISM ASSY and PICKUP ASSY 2 1
Floating Base
�4 �2
Connecting the Flexible Pickup Cable
Caution: Be sure to turn the LD short switch to the Short (lower) side when you remove the flexible pickup cable.
� Side view LD short SW Open
3
Short Remove the Pickup Flexible Cable and a connector, then remove the Servo Mechanism Assy.
Note: Turn the Short SW of the Pickup Assy to Short side (lower side).
1. Insert the FPC with the conductor side upward. Properly insert it to the slot until it stops. 2. Push down both sides of the lock lever until they stop. It cannot be locked with one side only. Imperfection of pushing down may cause unlocking.
FP
Pickup Assy Guide Shaft
C re
tac cep
les
2
FPC conductor side
2
1
Disconnecting the flexible pickup cable
1. Pull up the lock lever upward. 2. After unlocking, pull out the FPC.