|
|
|
Who's Online
There currently are 5903 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
;
The manuel was exactly what I needed and I received it promptly. Thanks
;
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
OPERATION
Replacing the filter
1. Hold both ends of the filter cover and slide it in the direction indicated by the arrow in the diagram below to remove the cover.
Emergency Disc Removal
In the following cases, discs can be ejected using the emergency ejection hole. ÷ Trouble with the device makes it impossible to remove the disc using the OPEN/CLOSE button or a software command. ÷ A disc that you need to eject remains inside the device but the power is off. 1. Confirm that the power for the device is OFF and that the disc has stopped spinning. 2. Remove the filter cover in the same manner as when replacing a filter. 3. Insert the accompanying pin for emergency ejection straight into the emergency ejection hole and press firmly.
DVD-R DRIVE
DVR-S201
R
DISC READ/WRITE
Filter cover
2. Once the filter cover has been removed, you will see a filter on the reverse side. Replace the old filter with a new filter. 3. Put the two hooks on the reverse of filter cover into the holes of front bezel, and follow the reverse of the procedure described in 1 above to return the filter cover to its original position.
D
V
D
-R D R IV E
R
D
V
R
-S
201
DVD-R DRIVE
DVR-S201
R
Holes of front bezel
NOTES: ÷ Always be sure to return the filter cover to its original position after replacing the filter. (Note that failing to do so may result in the breakdown or malfunctioning of the drive.) ÷ Note that sliding by force and holding down the filter cover may break hooks. Determining when the filter needs to be replaced ÷ When the filter has become noticeably dirty. ÷ When the internal overheating indicator begins to come on frequently in spite of the operating environment temperature remaining within the specified operating environment temperature range. (Note that here the �overheating indicator� is to be understood as being lit whenever READ/ WRITE orange indicator flashes repeatedly.) * Please contact after-sales service personnel or the store where you purchased your drive to purchase new filters.
4. Pull it out as far as you need to and remove the disc. (The disc tray will open about 5 to 10 mm.) NOTES: ÷ Make sure to use only the accompanying pin for emergency ejection. (No other object should be inserted.) ÷ Never attempt to forcibly eject a disc that is still rotating, as doing so could result in injury personal or in damage to the disc. ÷ Do not place items within 12 cm of the front of this device, as doing so could obstruct the disc ejection operation. ÷ Always be sure to remove the filter cover after forcibly removing a disc. Note that failing to do so may result in the breakdown or malfunctioning of the drive.
11
<DRC1101> En
English
|
|
|
> |
|
