|
Who's Online
There currently are 5944 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
1
2
3
4
2. SERIAL DOWNLOAD
[Purposes]
A
1. When the main board is replaced, the firmware versions for the system control computer, drive, and the TUFL microcomputer do not match, and operations of the unit may be destabilized. In such a case, the versions for the above three must be matched. 2. This method is used when disc downloading fails. � In the serial download, the stored code are not downloaded to HDD. After serial downloading, be sure to do disc download.
[Tools to be used]
B
[Connection]
Connect as follows:
* PC with serial port * RS-232C straight cable * RS-232C I/F jig (GGF1348) * 7P FFC (VDA1681) * Download program (UFU.exe) * Firmware
PC
RS-232C cable
RS-232C I/F
7P FFC
This unit
C
[Procedures]
1 Connect the 232C I/F jigs above way. 2 Turn on the PC and start the " UFU.exe ". 3 Select the Firmware file. ("sz0" file) 4 Turn the DVD recorder on and start the download program. " Target Device is connected " is appeared on the screen.
D
5 Select the Communication Speed (Baud Rate) a) Base Speed 38,400 b) Data Send Speed 115,200 6 START � Even if you click "START" button, sometimes "Communication Error" may come out one to twice, and download may fail. In this case, please click "START" again. � Other factors can be considerd if download fails 3 times or more. � And it takes about an hour for updating the firmware.
5
E
4
6
F
74
1 2
DVR-533H-S
3 4
|
|
|
> |
|