Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Great to be able to set channels again, on an old but stoll fine working TV
Text excerpt from page 72 (click to view)
11
The Video/Audio Adjust menu
4 Use the / (cursor left/right) buttons to adjust the currently selected picture quality setting. 5 When you have all the settings as you want them, press HOME MENU to exit. Tip � To see more of the picture as you adjust different settings, press ENTER after selecting the setting you want to adjust. Note � The Black Setup setting applies only when playing NTSC discs.
Audio DRC
� Default setting: Off When watching Dolby Digital material at low volume, it�s easy to lose low level sounds completely�including some of the dialog. Switching on Audio DRC (Dynamic Range Control) can help by bringing up the low level sounds, while controlling high level peaks. 1 During playback or when paused, press HOME MENU and select �Video/Audio Adjust�. 2 Select �Audio Adjust�.
3 Use the / (cursor left/right) buttons to adjust DRC from �Off� to �Max�.
Audio Adjust
Audio DRC
Off
Max
Exactly how much difference you can hear between the settings will depend on the material. Remember � Audio DRC is not effective when listening to a disc via the digital output when Dolby Digital Out is set to Dolby Digital. In this case adjust the dynamic range from your AV amplifier/receiver.