|
|
|
Who's Online
There currently are 5734 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Zeer duidelijke afdrukken op A4-formaat , zeer uitgebreide handleiding . Pluspunt ,zeer snelle
respons van jullie , binnen de 24h . Top !!!
;
I AM HIGHLY IMPRESSED BY THE EASE OF USE OF THIS DOWNLOAD SERVICE. INSTRUCTIONS ARE CLEAR AND SIMPLE TO FOLLOW....EVEN BY TECHNOPHOBES SUCH AS MYSELF. THE EMAILS POINT YOU IN THE RIGHT DIRECTION...ITS SO EASY PEASY. THE DOWNLOAD CHOICE OF USER MANUALS IS EXTENSIVE AND I COULD NOT FIND A CHEAPER OR MORE EFFICIENT SERVICE ON THE INTERNET. I COULD NOT HAVE MADE A BETTER CHOICE OF INFORMATION PROVIDER. SHOULD I EVER NEED ANOTHER USER MANUAL, THEN THIS IS THE FIRST CHOICE SITE. COULD NOT BE BETTER PLEASED!!!!!!!...MANY THANXES FROM JIM BURNS
;
I was impressed with the quality of service (frequent e-mails to let you know the status of your order), and the speed at which the download became available. The manual was a life saver and was not easy to track down. Thank you for such an excellent service.
;
the manual was just what i wanted it had all the revelent information required to operate the hifi .Iwould use any manual i downloaded for any item which needs a manual
;
Die gewünschte Bedienungsanleitung wurde vereinbarungsgemäß in deutsch bereitgestellt. Sie ist gut lesbar. Kein Kauderwelsch.
Danke für den Service.
Recording
06
� Use the or Off.
and
buttons to switch VPS/PDC On
2 After making the settings, press ENTER. The program details are shown at the bottom of the screen for a few seconds then the screen is automatically exited. � If you haven�t set up the guide channels (or at least the guide channel for the PlusCode programming number that you entered), the recorder will prompt you to enter the channel number that the TV program is showing on.
1 Press �VIDEO Plus+�. The front panel display shows the current recording mode and prompts you to enter the PlusCode programming number.
P L US CODE
2 Use the number buttons to enter the PlusCode programming number.
2 9 32 4
� To clear the last digit entered, press CLEAR. � Use the PREV / NEXT button to switch VPS/ PDC on/off. With VPS/PDC on, the front panel VPS/ PDC indicator lights. (Note that a maximum of 8 timer recordings can be set with VPS/PDC on.) 3 Press ENTER. The display shows the timer settings: Date Start time End time Recording channel. � If CODE ERROR appears in the display, check that the PlusCode programming number is correct and that the guide channel is set (see Set VIDEO Plus+ CH on page 81), then set the timer recording again. � If CAN�T SET appears in the display, it means that although you entered a valid PlusCode programming number, the program has already finished.
Tip � You can check the timer program settings by pressing TIMER REC to display the timer recording screen.
VIDEO Plus+ programming with the power off
You can enter a PlusCode programming number when the recorder is in standby.
VIDEO Plus+
CLEAR
Extending a timer recording in progress
You can extend a timer recording beyond the programmed end time in two different ways. This can be useful if a broadcast program overruns, for example.
CLEAR
ENTER
ENTER
PREV
NEXT
HOME MENU
ì
Important � You can�t use this feature until you have set up the guide channels. See Set VIDEO Plus+ CH on page 81. � You can�t change the recording mode. � You can�t program daily or weekly timer recordings.
PREV REC
NEXT STOP REC
TIMER REC
ì
51
En
|
|
|
> |
|
