|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Quick delivery, the document was usefull, although the copy was i little bit unclear in the details.
 ;
A complete and well done copy of the manual, at a not expansive price!
The delivery of the manual is very fast.
Thank you for all
;
Perfect quality. Was able to fix speed drifting on my Sansui Turntable using the service manual instructions for PLL adjustment.
;
I am very happy regarding the online purchase of this manual from Owner-Manuals.com as with this I could set right my Denon CD player and Amplifier.
I once again sincerely thank them for the prompt service which was rendered to me.
N. Shanker
;
More than pleased with my prurchase, very good product for the price.
Section
Audio Adjustments
08
Fine adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ Low/EQ Mid/EQ High).
4 Press E or e to select the desired Q factor. Press E or e until the desired Q factor appears in the display.
2 N�1 N�1 W�2 W
� Pressing 5 or � on the head unit also performs the same operation. Level (dB) Note Q=2N Center frequency Q=2W � If you make adjustments when a curve other than CUSTOM2 is selected, CUSTOM1 curve is updated. Frequency (Hz)
1 Press A and hold unitil frequency and the Q factor (e.g., F 80 Q 1W) appears in the display. � Pressing and holding AUDIO on the head unit also performs the same operation. 2 Press A to select the desired band for adjustment. Low�Mid�High � Pressing AUDIO on the head unit also performs the same operation. 3 Select the desired frequency with 1 or ¡. Press 1 or ¡ until the desired frequency appears in the display. Low : 40�80�100�160 (Hz) Mid : 200�500�1 k�2 k (Hz) High : 3.15 k�8 k�10 k�12.5 k (Hz) � Pressing 2 or 3 on the head unit also performs the same operation.
Adjusting bass
You can adjust the cut-off frequency and the bass level. � In FRT1 mode, bass adjustment affects only the rear output: front output cannot be adjusted. 1 Press A to select Bass. Press A until Bass appears in the display. � Pressing AUDIO on the head unit also performs the same operation. 2 Select the desired frequency with 1 or ¡. Press 1 or ¡ until the desired frequency appears in the display.
40�63�100�160 (Hz)
English Español Deutsch Français Italiano Nederlands
57
� Pressing 2 or 3 on the head unit also performs the same operation. 3 Press E or e to adjust the bass level. Each press of E or e increases or decreases the bass level. +6 � �6 is displayed as the level is increased or decreased. � Pressing 5 or � on the head unit also performs the same operation.
En
|
|
|
> |
|
