Great manual...really saved me. The only problem is that I thought I would be able to download it directly when I paid for it but never received the download instructions until the next morning. The board trace pages were somewhat light also: really need to turn up the contrast on the printer before printing them. The schematic page was great; very clear! Well worth the money.
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
Had everything I needed. Onyly took a few hours after paid for by PayPal. The copy was very readable.
Text excerpt from page 19 (click to view)
DVD-R100
Remove the TRAVERSE MECHA ASSY
� Plase go after removing MAIN Assy. (Refer to "Rrmove the MAIN Assy".)
5 Remove the Mecha Bracket F 2 x2 1 Cable Clamper is opened. 4 x2
TRAVERSE MECHA ASSYand PICKUP ASSY
Note: When new TRAVERSE MECHA ASSY is exchanged, a gray wire rod is removed by one turn.
gray wire 3 The earth wire is removed. 2 x2
Method of exchanging small fan
� Plase go after removing WIFB Assy. (Refer to "Rrmove the MAIN Assy".)
2 Remove the Fan Blacket S
1 x2 4 x1
After the installation, a red, black wire rod and a gray wire rod are twisted about four times on the other side.