|
Who's Online
There currently are 5595 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Audio Settings and Video Adjust menus
06
Chapter 6
Audio Settings and Video Adjust menus
Audio Settings menu
The Audio Settings menu offers features for adjusting the way discs sound. 1 Press HOME MENU and select �Audio Settings� from the on-screen display.
Audio Settings
Note � Audio DRC is only effective with Dolby Digital audio sources. � Audio DRC is only effective through the digital output when Digital Out is set to On, and Dolby Digital Out is set to Dolby Digital > PCM (see Digital Audio Out settings on page 38). � The effect of Audio DRC also depends on your speakers and AV receiver settings.
2 /
Select and change settings using the / (cursor) buttons, and ENTER.
Audio Settings Virtual Surround Audio DRC Dialog On Off
/
Virtual Surround
� Settings: On, Off (default) Switch on Virtual Surround to enjoy realistic surround sound effects from just two speakers. Tip
Audio DRC
� Settings: High, Medium, Low, Off (default) When watching Dolby Digital DVDs at low volume, it�s easy to lose the quieter sounds completely�including some of the dialog. Switching Audio DRC (Dynamic Range Control) to on can help by bringing up the quieter sounds, while controlling loud peaks. How much of a difference you hear depends on the material you�re listening to. If the material doesn�t have wide variations in volume, you may not notice much change.
� You can also use the SURROUND button on the remote control to switch Virtual Surround on. Note � 96 kHz linear PCM audio is automatically downsampled to 48 kHz if Virtual Surround is switched on. � The Audio Output Mode (see page 44) must be set to 2 Channel in order to be able to use Virtual Surround.
35
En
|
|
|
> |
|