It was magic after so many years to still be able to source this info. It was equally amazing to return my Pioneer receiver to it near new sound quality AFTER NEARLY 30 YEARS! Thank you for this ability!
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
The manual is an excellent reproduction with complete schematics, made troubleshooting and repair a simple process.
Text excerpt from page 63 (click to view)
5
6
7
8
2 DVD Jitter Adjustment
� Playback method of inner and outer address for the purpose is refererd to "6.4 TEST MODE". � Jitter indication of the monitor is refererd to "7.1.3 TEST MODE SCREEN DISPLAY". Use disc: GGV1025
A
START
� Test mode � Play the DVD test disc at outer track (around #200000) Mechanism Assy Adjust the Tangential Adjustment Screw so that jitter becomes minimum. � Play the DVD test disc at inner track (around #30000)
J4 : Min
B
K
Mechanism Assy Adjust the Radial Adjustment Screw so that jitter becomes minimum.
J4 : Min
C
J4 : - - - -
Player Monitor
� Play the DVD test disc at outer track (around #200000)
D
Mechanism Assy
CHECK
Turn the POWER OFF in case of NG once, and perform the adjustment once again.
NG
Confirm the error rate that is displayed "OK" (Example ER (av): 2.5e - 5-*OK )
Readjust the Tangential Adjustment Screw so that jitter becomes minimum.
J4 : Min
E
If error rate is OK, locks a root of tangential and radial adjustment screws with the Screw tight, and go to step !. Screw tight: GYL1001
O
Disc playback normally. � The measurement of block error rate
