I purchased a copy of my old JVC VCR Service manual from Owner-Manuals.com
The copy was complete and valuable to me.
I was able to fix my VCR - it had a bad belt.
I am glad I found Owner-Manuals.com
Great Price. Thanks
Good quality, the manual help me to repair the echo/reverb section
Text excerpt from page 34 (click to view)
1
2
3
4
A
2) Set the command options after setting the parameter file. (You only need to set the command options the first time you start the program *1) *1 Command option settings are cleared when you change the parameter file, making it necessary to reconfigure the settings. Setup procedure: Display the "Device Setup" screen by selecting "Setup" from the "Device" menu.
B
Under the "Advanced" tab, check the following check boxes under "Command options" on the "Device Setup" screen.
C
D
Click "OK" to finish the setup. Items to check Blank check before erase Read verify after Program Checksum after Program Description of the command option Checks if the chip is blank before erasure (decides erasure is unnecessary if the area is blank.) Automatically verifies newly downloaded firmware. Automatically performs a checksum on newly downloaded firmware.
