|
Who's Online
There currently are 5910 guests and 4 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
;
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
;
Clear and easy to read. All details as expected. Price acceptable , and quick delivery.
;
Quick response and exactly what I was looking for and at a great fair price!
;
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
USING THE EFFECT/SAMPLER FUNCTIONS 1 Set the effect/sampler selector switch to DELAY. 2 Set the effect/sampler channel selector switch to 2.
÷ LED �2� on the effect parameter/BPM display will light. ÷ The BPM of the music input to CH-2 will be displayed on the BPM display�s counter. * The BPM band that matches the music on CH-2 can be selected with the BPM measurement range selector switch. * LED will blink if BPM cannot be measured for more than 2 seconds. In this case, use manual mode to make settings (see page 15). channel selector switch when delay, echo, reverb (pages 18 and 19) and similar effects have been turned on, all of the reverberation of the prior channel�s effects will be output. ÷ Only operate the effect/sampler selector switch when effects are off (when the effect/sampler ON/OFF switch is lit orange). Operating it with effects on could generate noise.
BPM display
1
2
3
4
AUTO BPM COUNTER
BPM 70-139 BPM 91-180 BPM
3 Set the parameter value.
When headphone cue�s EFFECTS/SAMPLER is pressed, effect sound can be confirmed via headphone output. Setting the Delay Time ÷ Setting the delay time to match one beat of the BPM displayed on the BPM display�s counter makes effect application more effective. ÷ By pressing the effect beat selector switch, delay time of 1/4 to 8/1 can be set for one beat of the measured BPM. ÷ More precise delay times can be set with the effect/ sampler parameter 1 knob (TIME). ÷ As �1/2� will light on the beat display if delay time is set to 1/2 of one beat of the BPM, the parameter value can be set using the beat display as a guide. Setting to Balance Original and Delayed Sound Levels ÷ The balance between original and delayed sound levels is set using the effect/sampler parameter 2 knob (LEVEL/DEPTH). Turning this knob to the left will decrease delayed sound and turning it to the right will increase it.
Counter BPM measurement range selector switch
Effect parameter/ BPM display
MASTER
1
2
3
4
MIC
LED Counter
mSec
PARAMETER1
1/2
3/4
1/1
2/1
4/1
Beat display Effect beat selector switch
1
2
4
BEAT
8
16
�1/2� will light
÷ Display where a 1/2-beat delay (250mSec) has been set to music with a BPM of 120 (time conversion: 500mSec).
4 Turn on the effect/sampler ON/OFF switch.
÷ The effect/sampler ON/OFF switch will blink orange, and the delay effect will be applied to master output. ÷ If the switch is pressed once more, the effect will be turned off. * If it is turned on in time to the beat, the effect�s cycle will also start on the beat. Echo, auto pan, auto trans, filter, flanger can also be set similarly. Precautions: ÷ If the channel has been changed with the effect/sampler
17
<DRB1251>
|
|
|
> |
|