|
Who's Online
There currently are 5763 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Great quality copy, right what I was looking for, all I need to fix my radio.
Thanks
;
I BOUGHT A PAIR OF INFINITY VINTAGE SPEAKERS THAT REQUIRED TO BE REPAIRED AND THE ELECTRONIC TECHNICIAN ASKED ME FOR THE SERVICE MANUAL.
I TRIED TO GET IT AT THE MANUFACTURER'S SITE WITH NO SUCCESS, SO I STARTED TO LOOK FOR IT IN THE WEB FOR A LONG TIME, UNTIL I FOUND THE SERVICE MANUAL IN THIS EXCELLENT SITE "OWNER'S MANUAL.COM".
NOW I HAVE MY SPEAKERS WORKING AND ENJOYING THE MUSIC I LIKE.
THANKS TO "OWNER`S MANUAL.COM" I RECOMMEND THIS SITE TO EVERYONE.
;
Very quick response. Very good and accurate print quality of the scanned document.
;
The service manual was very usable and clear enough to see the individual values of all of the components (unlike some of the service manuals I have gotten in the past from web sites similar to this one). The price was right and the information was greatly appreciated. It helped me with an otherwise very difficult repair. It was much needed and appreciated. A faster turn around on my order would be nice, but I understand the constraints on your staff's time. Thank you for your service.
;
Excellent manual. Helped me out with disassembling and troubleshooting my projector.
5
6
7
8
- How to remove the Clamp Arm Assy
1. Make the system in the carriage mechanism mode, and set the mechanism to the eject mode. 2. Remove the three Springs. 3. While pressing the position A, turn the Clamp Arm Assy upward, slide it to the left, and remove. Caution: When assembling, place the boss of the Detection Pin in the cam unit of the Loading Rack.
A
Spring
B
Clamp Arm Assy Spring Detection Pin Spring A
place the boss in the cam
Detection Pin
C
- How to remove the Spindle Motor Assy
1. Make the system in the carriage mechanism mode, and have it clamped. 2. Remove the CD Core Unit and remove the leads from the Inner Holder. 3. Set the mechanism to the eject mode and remove the Clamp Arm Assy. 4. Set the mechanism to the clamped and move the Pickup to circumference. 5. Remove the two Screws, and remove the Spindle Motor Assy.
Screw
D
Spindle Motor Assy
E
F
CX-3164
5 6
7
8
27
|
|
|
> |
|