I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
Text excerpt from page 90 (click to view)
1
2
3
4
When unplugging the cord assy, make sure to use jig GGF1539. If the antenna cable is directly unplugged without using jig GGF1539, you might damage your fingertip or fingernail.
A
- How to Remove the Cord Assy
When unplugging cord assy, hook the point of jig GGF1539 on the lid of cord assy and vertically draw out along with the engagement axis of connector.
GGF1539
1
Cord Assy
B
Fig.3
2
- How to Attach the Cord Assy
Connector
For inserting cord assy, adjust cord assy with the engagement axis of connector and insert it as vertically as possible. Do not insert the cord assy in extreme slant, as the connector might suffer damage.
C
- Removing the Grille Assy (Fig.4)
1
Remove the four screws.
1
Disconnect the connector and then remove the Grille Assy.
