I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Excelent service, the manual is complete, very cheap and fast
Alberto
Text excerpt from page 91 (click to view)
CX-916
1.4 POWER SUPPLY AND LOADING SECTION
The power supply of the system uses VD (8.3V) from the mother board. VD is fed to 5 channel CD driver IC, 5V Reg IC and disc detection LED. The microcomputer turns on or off the CD driver and the 5V using �CONT� and �CD5VON�, respectively. The loading drive is turned on or off by the input signals �CDEJET� and �CDLOAD�. No control terminal is provided for turning the loading drive on or off.