I'm so glad I was able to find a site to download my missing manuals. Very reasonable prices and they kept me informed about the process and I had my manual within less than a day. The only thing I wish was an option is a 100% English version with no spanish or anything. But overall great site.
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Text excerpt from page 31 (click to view)
Section
Audio Adjustments
07
1 Press EQ to select the equalizer. Press EQ repeatedly to swith between the following equalizer.
SUPER BASS�POWERFUL�NATURAL� VOCAL�CUSTOM1�CUSTOM2�FLAT
Fine adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ Low/EQ Mid/EQ High).
Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM1 or
CUSTOM2.
Level (dB) Q=2N Center frequency Q=2W
Frequency (Hz)
1 Press AUDIO to select the equalizer mode . Press AUDIO until EQ Low/EQ Mid/EQ High appears in the display. 2 Select the equalizer band you want to adjust with 2/3. EQ Low (low)�EQ Mid (mid)�EQ High (high) 3 Press 5 or � to adjust the equalizer curve. Each press of 5 or � increases or decreases the equalizer curve respectively. � +6 � �6 is displayed as the equalizer curve is increased or decreased. Note � If you make adjustments when a curve other than CUSTOM2 is selected, CUSTOM1 curve is updated.
1 Press AUDIO and hold unitil frequency and the Q factor (e.g., F 80 Q 1W) appears in the display. 2 Press AUDIO to select the desired band for adjustment. LOW (low)�MID (mid)�HIGH (high) 3 Select the desired frequency with 2/3. Press 2 or 3 until the desired frequency appears in the display. LOW : 40�80�100�160 (Hz) MID : 200�500�1 k�2 k (Hz)
HIGH : 3.15 k�8 k�10 k�12.5 k (Hz)
English Español Deutsch Français Italiano Nederlands
4 Press 5/� to select the desired Q factor. Press 5 or � until the desired Q factor appears in the display.
2 N�1 N�1 W�2 W
Note � If you make adjustments when a curve other than CUSTOM2 is selected, CUSTOM1 curve is updated.