This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
This Service Manual was exactly what I needed to repair my Philips TV. The purchase was convenient and I received the manual at the same day I paid for it.
Text excerpt from page 59 (click to view)
5
6
7
8
7. GENERAL INFORMATION
7.1 DIAGNOSIS
A
- Removing the Case (not shown) 1. Remove the Case.
- Removing the CD Mechanism Module (Fig.1)
CD Mechanism Module
1
Remove the four screws.
Disconnect the connector and then remove the CD Mechanism Module.
1 1
B
- Removing the Grille Assy (Fig.1)
2
Remove the two screws and then remove the Grille Assy.
2
1 1
2
C
Grille Assy
- Removing the Tuner Amp Unit (Fig.2)
Fig.1
1 2 3 4
Remove the screw.
2
2 2
D
Remove the three screws.
Straighten the tabs at three locations indicated. Remove the screw and then remove the Tuner Amp Unit.
4 1
E
3
3
3
Tuner Amp Unit The Tuner Amp Unit may appear slightly different to the unit shown above.