The purchased manual is an high-quality scan of the original JVC paper-based Service Manual. The Service Manual includes the Owner´s Manual, so you do not have to buy both of them.
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
Text excerpt from page 65 (click to view)
DEH-P3000R
Audio Adjustment
Equalizer Curve Fine Adjustment
You can adjust the center frequency of each equalizer curve band (LOW/MID/HIGH) and the Q factor (curve characteristics).
Level (dB)
Q=2N Center frequency
Q=2W Frequency (Hz)
1. Press the AUDIO button for 2 or more seconds to select Equalizer Curve Fine Adjustment. 2. Press the AUDIO button to select the desired band for adjustment. 3. Select the desired frequency with the 2/3 buttons.
LOW: 40 + 80 + 100 + 160 (Hz) = = = MID: 200 + 500 + 1K + 2K (Hz) = = = HIGH: 3K + 8K + 10K + 12K (Hz) = = =
4. Select the desired Q factor with the 5/� buttons.
2N + 1N + 1W + 2W = = =
Loudness Adjustment (LOUD)
The Loudness function compensates for deficiencies in the low and high sound ranges at low volume. You can select a desired Loudness level.
1. Press the AUDIO button and select the Loudness mode (LOUD) in the Audio Menu. 2. Switch the Loudness function ON/OFF with the 5/� buttons. 3. Select the desired level with the 2/3 buttons.
LOW + MID + HI = =