|
|
|
Who's Online
There currently are 5495 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
Power ON/OFF Tuner Built-in CD player
1 Press SOURCE to select the tuner. Turning unit on Listening to the radio Playing a CD 2 Use VOLUME to adjust the sound level.
Press SOURCE turn unit on. Rotate to increase or decrease the volume. When you select a source the unit is turned on. 3 Press to select a band. BAND
3 4 1 2 played, for FM or
BAND 1 TRACK NUMBER indicator with quick presses.
BAND Press until the desired band is disF1, F2, F3 AM.
Selecting a source 4 To perform manual tuning, press 2 or 3
which band radio is tuned to, Shows the track currently playing. You can select a source you want to listen The frequencies move up or down step by AM or FM. to. To switch to the built-in CD player, load a step. 2 PLAY TIME indicator disc in this unit.
2 FREQUENCY indicator Shows elapsed playing time of the 5 To perform seek tuning, press and hold 2 Shows to which frequency the tuner is current track. Press SOURCE to select a source. or 3 for about one second and release. tuned. Press SOURCE repeatedly to switch between The tuner will scan the frequencies until a
3 PRESET NUMBER indicator CD loading slot appears. Built-in CD player�Tuner is found. Shows what preset has been selected. � You can cancel seek tuning by pressing
1 Press OPEN to open the front panel. the following sources: broadcast strong enough for good reception
Notes 4 STEREO () indicator Playback will automatically start. � If press and hold 2 or 3 you can skip Shows that the frequency selected is � When no disc is set in this product, built-in broadcasting stations. Seek tuning starts as being broadcast in stereo. CD loading slot CD player source will not change. soon as you release the buttons. Note
2 Insert a into the CD loading slot. either 2 or 3 with a quick press.
� When this unit�s blue/white lead is con-
nected to the car�s auto-antenna relay control terminal, the car�s antenna extends when this unit�s source � When the frequency selected is being switched on. To retract antenna, broadcast in stereo the indicaSTEREO () switch the source off. tor will light.
CD EJECT button
� You can eject a by pressing CD EJECT. 3 Close the front panel.
Turning the unit off
Press SOURCE and hold for at least one second to turn the unit off.
� After a CD has been inserted, press
SOURCE to select the built-in CD player.
DEH-240F,2400F,24F
57
|
|
|
> |
|
