Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
Dear Sir,
Document is original service document of sharp. I had a problem with the door contacts. Fuses where blown. With the manual in a few minuts is was clear what the problem was.
Manual was of great help.
With kind regards,
Martie Verhoeven
The Netherlands.
Text excerpt from page 43 (click to view)
DEH-1300,12
7.1.2 DISASSEMBLY
- Removing the Case Unit (not shown)
1. Remove the Case Unit.
- Removing the CD Mechanism Module (Fig.1)
Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module (not shown).
- Removing the Grille Assy (not shown)
1. Disconnect the two stoppers and then remove the Grille Assy.
CD Mechanism Module
Fig.1
Cover
- Removing the Tuner Amp Unit
Remove the three screws and then remove the Cover. (Fig.2) Remove the two screws. (Fig.2)
Remove the screw. (Fig.3)
Fig.2
Straight the tabs at fore locations indicated and then remove the Tuner Amp Unit. (Fig.3)