|
|
|
Who's Online
There currently are 5865 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good detail, all pages clear, exactly what I needed
;
Excellent service, and just what I needed to service my TU-7700. All pages of the manual are clear and easily readable.
;
Excellent printing quality.
A complete and very usefull service manual with all details.
GREAT SERVICE AT VERY LOW PRICE!
A+++++++++++++++++++++++++
;
We received the manual in a timely manner and it was exactly what we were expecting. Excellent replacement for original Service Manual.
All schematics are very legible. We are really satisfied.
;
We received the manual in a timely manner and it was exactly what we were expecting. Excellent replacement for original Service Manual.
All schematics are very legible. We are really satisfied.
1
2
3
4
A
1.3 Requirements for storage and baking after opening the antihumidity packaging (dry bag)
After a dry pack has been opened, all SMD packages within that bag must complete all solder reflow processing, including rework, within 168 hours (1 week), unless opened parts are stored in a dry cabinet at <10% RH. After this time, parts must be baked as per the below conditions before use. Heatproof trays (you will see clear �Heat Proof Tray� markings) are employed for some products. If the term of viability after opening the antihumidity packaging elapses during your manufacturing span, be sure to apply a baking process to the products with the heatproof tray before mounting the products. The recommended baking conditions are as follows: at 125 degrees C for 24 hours
B
1.4 Analysis of nonconforming items
When you remove our semiconductor products to analyze a nonconforming item, it is recommended to remove them after baking under the conditions mentioned in 1.3 above. If you remove the product using hot air in a status where the resin has absorbed moisture, heat stress may cause package cracking or adhesion degradation of the resin, and the actual reason for nonconformity may not found easily.
C
D
E
F
60
1 2
DBR-TF100
3 4
|
|
|
> |
|
