|
|
|
Who's Online
There currently are 5999 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
 ;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
;
The manual was exactly what I wanted and I found it nowhere else. Thanks!
;
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
BASIC CONNECTIONS
Press the STANDBY button on the remote controller to wake up the digital receiver.
The receiver will display the "Welcome" screen (refer to page 19) to give you something to look at while you are tuning the TV.
Tune the TV.
Now you need to tune the TV channel you have selected for watching digital programmes. If you are not sure how to do this, refer to the TV's operation guide. Store the channel when the "Welcome" screen (refer to page 19) appears on the TV.
Connect the antenna to the digital receiver and check if the picture remains steady (no wobbling, interference, or snow).
Switch the TV to all the other tuned channels, including the channel tuned for the VCR, and check the picture quality.
If the picture quality is good, go to the "GENERAL OPERATIONS" section on page 18. If there is a picture quality problem even though the antenna is connected, follow the instructions below. 1 Disconnect the antenna from the back of the receiver. 2 Check to make sure the TV is tuned to the channel selected for watching digital programmes. 3 If the "Welcome" message is displayed on the screen, press the SELECT button on the remote controller. The Main Menu screen should now be displayed. 4 Select Option 4 "Viewing Preferences" from the Main Menu screen, Option 2 "TV and Video Settings," and then Option 6 "UHF Output Channel." The current setting for this option, 36, should be changed if there is interference. Select a channel that is far from 36. Press the RED button (back) to return to the previous screen and store the setting. 5 Repeat the steps from "Tune the TV" to check if the picture quality improves. When the picture quality is satisfactory, go to the "GENERAL OPERATIONS" section on page 18.
14
<BRB1056>
|
|
|
> |
|
