|
Who's Online
There currently are 5721 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Excellant!!! Very quick and easy....Best $4.99 I have spent in a very long time..
I highly recommend this.
;
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
;
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
;
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
;
I am happy to get a rare TECHNICS SH-9090 Owner's Manual by PDF in clear copy.
Assembly and Installation 1
Remove base
Using the provided Allen wrench, remove the three base screws and then the base from the speaker. Save these screws and the base if there is any chance you will want to replace the bases for ordinary floor installations in the future.
4
Temporary mounting
NOTE When the mounting fixture is combined with the speaker system S-VSL3, the total weight is about 10 kg. The installation technician should decide on the optimum mounting method based on an assessment of the wall�s materials and structure. � Confirm the height from the floor. Enough space must be left between the floor surface and the speaker body to allow the introduction of a screwdriver in order to install and tighten the terminal cover.
70
76.6 962.6
Hole for temporary mounting (� 5.5)
Using the furnished 3 mm Allen wrench, remove the four screws from the top of the speaker. Place the upper plate on the speaker top and use the 3 mm Allen wrench to tighten the removed mounting screws.
Consult the dimensional diagram on P. 9 for external dimensions following speaker installation.
85
Floor
5
Since the hex holes in the mounting screws are rather shallow, be sure to hold the Allen wrench securely to prevent slipping, and tighten the screws securely to prevent slipping.
Mark the position of the mounting screws
Use a level or plumb bob to confirm the perpendicular, and mark the position of the mounting screws on the wall. The mounting screws should have a diameter of 4-5 mm (5 mm is recommended) in 6-8 locations. The safety strap location and mounting screw diameters should be 1 screw of 5-6 mm in the upper square hole (6 mm is recommended); bushing location and screw diameters are 2 screws of 5-6 mm (6 mm recommended) within the 9x15 rectangular hole.
3
Fasten the safety strap to the speaker
Temporarily remove the mounting fixture on the rear of the speaker, place around the safety strap and once again fasten the mounting fixture to the speaker.
Safety strap
1055.6
2
Attach upper plate
7 En
English
|
|
|
> |
|