|
Who's Online
There currently are 5656 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
;
Dear Sir,
Document is original service document of sharp. I had a problem with the door contacts. Fuses where blown. With the manual in a few minuts is was clear what the problem was.
Manual was of great help.
With kind regards,
Martie Verhoeven
The Netherlands.
CDX-MG6036ZH
7.1.2 DISASSEMBLY
- Removing the upper case (not shown)
1. Remove the five screws, then remove the upper case.
- Removing the Extension Unit (Fig. 1)
1. Remove the three screws B, then remove the side frame and holder. 2. Remove screw C, screw D and PCB from the connector. 3. Straighten the three currently bent claws, then remove the extension unit.
- Removing the Grille Assy (Fig. 1)
1. Remove the two screws A and the connector, then remove the grille assy.
Fig. 1
- Removing the CD Mechanism Module (Fig. 2)
1. Remove the three screws A, then remove the front frame. 2. Remove the three screws B and two screws C, then remove the damper and holder. 3. Remove the two spring As, spring B and spring C from the hook, then remove the CD mechanism module.
� Precautions on Assembly � Apply spring C (black) to the front side hook. Remaining springs A and B are to be hung on the center hook.
Fig. 2
- Removing the Keyboard PCB (Fig. 3)
1. Remove screws A and B, then remove the switch PCB. 2. Remove the four screws C, then remove the guide. 3. Remove the four screws B and screw A, then remove the keyboard PCB.
Fig. 3
53
|
|
|
> |
|